Equipment & Service

For more detailed information on our capabilities, please select the instrument you are interested in from the list below.

We are happy to carry out measurements for you. Please contact us.

Measurement of thermal conductivity

  • Temperature range from -125°C to 500°C
  • Heating/cooling rates from 0.01°C/min to 50°C/min
  • Measuring range thermal diffusivity from 0.01mm²/s to 1000mm²/s
  • Measuring range thermal conductivity from 0.1W/mK to 2000W/mK
  • Probe diameter: 10mm, 12.7mm or 25.4mm (each +/-0.2mm)
  • Sample thickness: depending on the thermal conductivity
    Polymers: 0.05-3mm
    Ceramics: 0.5-5mm
    Metals: 1-5mm
  • Measurement of liquid samples possible
Frontalansicht eines Differenzkalometriegerätes
Barbara Holly

Measurement of calorimetric properties, e.g.

  • reaction temperatures,
  • crystallization,
  • specific heat capacity,
  • melting processes,
  • thermal stability,
  • glass transition temperature,
  • oxidative induction time,
  • oxidative induction temperature.

     
  • Temperature range from -180°C to 700°C
  • Heating rate range from 0.001K/min to 200K/min
  • rapid cooling: max. 200K/min
  • gas-tight measuring cell
  • Gas control for 2 sample gases and 1 shielding gas via integrated mass flow controller and software
  • compressed air cooling from RT to 700°C
  • automatically controlled liquid nitrogen cooling from -180°C to 700°C

Measurement of the frequency-dependent magnetic properties of soft magnetic materials

  • Samples in toroidal, round bar and sheet form
  • Measuring frequency range from 0.1Hz to 20kHz
  • Field strengths up to 120kA/m
  • Determination of remagnetization losses, coercive field strengths, magnetic polarizations, saturation polarizations, inductions, initial and maximum permeabilities, susceptibilities, remanences, new curves
Frontalansicht eines Magnetisiergeräts mit Warnaufkleber
Barbara Holly

Magnetization of hard magnets

  • magnetizing voltage from 50V to 400V DC
  • Maximum field strength of 3500kA/m

Injection molding of thermoplastics

  • 250kN clamping force
  • 20mm screw diameter
  • 31cm³ maximum stroke volume
  • 2350bar maximum injection pressure
Frontalansicht auf einen Kneter für Kunststoffe
Barbara Holly

Kneading and mixing of plastics, elastomers with particles, fibers, etc.

  • Mixing volume 48cm³
  • Extruder operation possible with additional extruder attachment
  • maximum speed 250 min-1
  • maximum torque 160Nm
  • maximum temperature 400°C

Device for measuring magnetic induction in gauss, tesla or ammeter

  • Measuring range from 0.01mT (0.1G or 0.01 kAm) to 2,999T (29.99kG or 2387kAm)
  • for measuring static direct and alternating fields
  • 3 measuring ranges
  • Relative and absolute positioning of up to 3 stepper motors, zero point travel and virtual zero points
  • 3D interpolation and circular interpolation of 2 out of 3 axes
  • Positioning speed between 30 steps/s and 10000 steps/s
  • Value range of 24 bits
  • Maximum path resolution of +/- 8,000,000 steps